Nord 4 by Smok

Smok Nord 4 product overview

Part of the popular Nord series, the Smok Nord 4 retains the classic pod design of the original device, but with the addition of a very chic leather option.

The combination of up to 80 watts of power with variable airflow means this device is capable of producing thicker, denser clouds when used with a low resistance coil. To handle the extra wattage the battery capacity has been increased from 1500mAh to 2000mAh – if you use it at the same wattage as the Nord 2, you’ll find the battery life lasts a fair bit longer.

The Nord 4 comes with 2 air inlet holes, placed on either side of the device. Designed to look like a steering wheel, these can be rotated to adjust between an airy vape suitable for higher wattages and a tighter vape suitable for lower wattages.

The wide wattage range means this is a versatile device, and by swapping out the coil for one with a lower resistance, such as the RPM Quartz 1.2 ohm coil (available separately), you’ll be able to enjoy a tight, Mouth-to-Lung inhale.

Compatible coils & e-liquids

The Smok Nord 4 can be used with high VG, 50:50, and nicotine salt e-liquids.

The Nord 4 works with Nord 4 RPM pods (which use RPM coils) and Nord 4 RPM 2 pods (which use RPM 2 coils).

For 50:50 & nic salt e-liquid, use:– RPM pod with RPM 0.3ohm, 0.8ohm, 1.0ohm or 1.2ohm coils (not included)- RPM2 pod with RPM 2 0.6ohm coil (not included) For high VG e-liquid, use:– RPM 2 pod with RPM 2 0.16ohm coil (included) or 0.25 coil (not included) – RPM pod with RPM 0.4ohm (included) or 0.6ohm coils (not included)

Recommended Wattages

• RPM 2 0.16ohm coil: 25 – 50W (best: 40W)
• RPM Mesh 0.4ohm coil: 25W

Who is the Smok Nord 4 for?

The Smok Nord 4 is great for vapers looking for a versatile device that is capable of producing both thick, dense clouds or a gentle Mouth-to-Lung vape. The high wattage range means this device is best for vapers who have some experience of variable wattage vaping.

FAQs

What e-liquid should I use with the Smok Nord 4?

The RPM 2 0.4ohm coil is best used with e-liquids with a VG:PG ratio of around 60:40 to 70:30. The RPM 2 0.16ohm coil is suitable for use with e-liquids with a VG:PG ratio of 70:30 or higher.

How do I maximise the life of the coil?

If you’re switching from the Nord 2, and taking advantage of the higher wattage range, you need to take more care with the coil due to the lower resistance

You can maximise the life of your coil by:

• priming the coil before usage
• using e-liquid with the right VG:PG ratios
• not going above the recommended wattage
• topping up your tank so that the coil never dries out.

Do note that coil life depends on a number of factors including how long you puff for, the e-liquid you use and the wattage you use your coil at. You’ll also find that high resistance coils, which are used at lower wattages, last longer than low resistance coils.

Is this a Direct-Lung or a Mouth-to-Lung device?

The RPM 2 Mesh 0.16 ohm coil provides a Direct-Lung hit with thick vapour and intense material. The RPM Mesh 0.4 ohm coil provides a Direct-Lung vape with a gentle throat hit. Usually coils with a resistance as low as 0.4 ohm are Direct-Lung, but this does depend on materials used as well as resistance, and there is an increasing trend towards using low resistance coils for a Direct-Lung inhale.

Why is this called the Smok Nord 4 and not the Smok Nord 3?

Good question. Smok viewed the Smok Nord X as being the third in the Nord line, which is why this is called the Smok Nord 4, despite there being no Smok Nord 3.

Product Care

Maximise coil life

• Use the correct type of e-liquid for the coil. This is indicated on the product page on E-Cigarette Direct.Allow e-liquid to soak into a new coil for at least five minutes before using it for the first time.*
• Keep the e-liquid in your tank above the level of the coil. This ensures the coil remains saturated.
• When using a bottom-charging device, remove the tank or pod when charging and store it upright.
• Use the correct wattage for the coil you are using. Wattage ranges are usually written on the coil itself or can be found on the packaging.

* Note that low-resistance coils used at higher wattages may need additional priming. Add a drop of e-liquid into each of the coil’s ports and allow extra time for it to soak in.

When to change a coil

Coils will need changing from time to time. Here are signs that your coil needs replacing:

• Inhale feels scratchy or harsh.
• Flavour starts to diminish.
• Vapour production reduces or ceases.

Do note that low-resistance coils used at high wattages will need changing more frequently than high-resistance coils used at low wattages.

Helpful guides

• A Beginner’s Guide to Coils
• How to Prime a Coil
• Easy Ways to Stop Vape Coils from Burning

The Smok Nord 4 comes with double the wattage range of the Smok Nord 2 (and more than four times that of the original Nord), making it a versatile device capable of producing thick, dense clouds and a restricted vape similar to that of a cigarette.