RPM2 by Smok

Smok RPM2 product overview

The Smok RPM 2 kit is a compact device which is under 11 cm in length, meaning it fits easily into the palm of your hand or a pocket. A large power button and simple up-down wattage controls make it easy to control the device, while powerful magnets ensure that the pod remains firmly in place even when the device is shaken – and also ensure that replacing the pod is quick and simple.

The pods feature an ergonomic design, which is designed to feel comfortable when vaping, while the large aperture allows for increased airflow. A transparent window in the pod allows you to see e-liquid levels, which helps ensure you can keep e-liquid levels topped up and avoid damaging the coil. A large 1.14 inch colour screen makes information such as power, voltage and resistance easily available, while an innovative puff monitoring system lets you know how many puffs you can take before needing to recharge.

Who is the Smok RPM 2 for?

The high wattage range and choice of MTL or DL coils means this device is suited to vapers who like the flexibility of choosing between an airy Mouth-to-Lung or Direct-Lung style of vaping, and who prefer a MTL vape with a gentler throat hit. The low resistance coils and high power rating means this device is best used by vapers with experience of high wattage vaping.

Compatible coils

The Smok RPM 2 works with RPM 2 and RPM pods. RPM 2 pods are compatible with RPM 2 mesh coils, and RPM pods are compatible with RPM coils.

Coil Ratings

RPM 2 0.16 ohm Mesh Coil: 25 – 50 W (best at 40 W). Best for DL vaping. RPM 0.4 ohm Mesh Coil: 25 W. Best for MTL vaping.

FAQS

What is the puff monitoring system?

The Smok RPM 2 assesses the battery life of the device and then estimates how many puffs it can provide before need recharging. This provides a more accurate estimate of how long you can use the device before needing to recharging it.

Why is the MTL coil just 0.4 ohm?

Traditionally Mouth-to-Lung coils have utilised a greater resistance than DL coils (typically above 1 ohm). This trend has evolved, with some devices using lower resistance coils for a Mouth-to-Lung vape, often with changes in the design to produce a satisfying vape which is still suitable for a tighter and more restricted vape. See MTL v. DL for more info.

What e-liquid should I use with this device?

The RPM 2 0.16 ohm is best used with higher VG e-liquids such as those with a VG:PG ratio such as 70:30 or 80:20. The RPM 0.4 ohm coil is best used with e-liquids with a VG:PG ratio between 50:50 and 70:30.

What is pass-through vaping?

Pass-through vaping allows you to use your device while it is charging.

How long do the coils last?

Coil life depends on many factors, including how long you puff for, the e-liquid you use and the wattage you use your coil at. Low resistance coils are used at higher wattages and do not last as long as high resistance coils.

You can extend coil life by priming the coil before usage (see product care), by using e-liquid with the right VG:PG ratios, by not going above the recommended wattage and by topping up your tank so that the coil never dries out. With care, the RPM 2 0.16 ohm coil should last anything from a couple of days to a week, while the RPM 0.4 ohm Mesh Coil should last a little longer.

Can I charge my RPM 2 overnight?

Lithium batteries should not be left unattended when charging. For more information see our battery safety infographic.

Product Care

Follow these simple steps to get the most out of your vape kit.

• For refillable devices, allow e-liquid to soak into the coil for at least five minutes before using the device.
• Always keep some e‑liquid in the pod or tank to ensure the coil is saturated.
• If using replaceable coils, push/screw them in firmly but don’t over tighten.
• For adjustable power devices, use recommended power settings for the coil or pod you are using (see box, coil or manual).
• When device is switched on, only press fire button when inhaling. This prevents condensation build up in the pod or tank.
• If using a refillable kit, use the correct e-liquid for the coil or pod you are using. See the product description for each kit for recommended e-liquid types
• Avoid filling refillable pods or tanks above the fill line or to the very top.

Battery advice

Do:

• Use the correct charging equipment for your device (see below). Use of third-party chargers may void your warranty.
• Charge batteries on a flat, hard surface.
• Turn your device off when not in use (if device comes with an on/off switch).
• Keep battery terminals clean. A quick swab with a cotton bud can improve performance and reliability.
• Always keep some charge in your battery.

Don’t:

• Use damaged batteries.
• Leave charging batteries unattended.
• Allow contact between your batteries and water.
• Carry batteries in a pocket/bag with coins or keys.
• Expose batteries to sunlight, extreme heat or cold.
• Allow batteries to go to zero charge.

Helpful guides

• How to Stop Tanks Leaking
• How to Prevent Coils Burning
• Common Vape Tank Mistakes (& How to Fix Them)
• Vape Battery Guide
• Battery Safety Infographic

Recommended charging equipment

• Veho Plug Adaptor
• Nitecore Intelli Charger (for external batteries)

The Smok RPM2 is a versatile device that can deliver up to 80 watts of power and can be used for either Mouth-to-Lung or Direct-Lung vaping, depending on the coil used.